O3 Sany UV-C

UV-C

UV-C ultraviolet light is electromagnetic radiation with wavelengths ranging between 200 and 280 nm; it ensures a broad spectrum germicidal action, with peak efficiency at 257.3 nm. 

In the O3 MUSTER SANY UV-C device the lamps that emit UV-C radiation are located inside the unit.

As a result, it is possible to sanitise the room even in the presence of people using solely the UV-C mode:

1. Sanitises during work
2. Sanitises during short lunch breaks
3. Ensure the constant preventive action of the device at all times, with no limitations

The O3 MUSTER SANY UV-C device sanitises rooms naturally, cheaply and ecologically, without using chemicals.

It is based on dual technology, which can also be combined between Ozone and UV-C, using the air flow that the device draws in and emits purified, after going through the sanitising lamps and an integrated filter system.

Here is the action developed by these two technologies in detail:

UV-C technology: UV-C lamps perform a germicidal action directly on the air flow that goes through the device, thus ensuring continuous sanitising. When used individually, this technology offers the possibility to be used even in the presence of people in the room.

Ozone technology: a specific generator ozonises the air present in the room; the ozone thus produced is released into the room, sanitising the air and all surfaces. (Please note that the presence of personnel inside the room is not permitted during the sanitising process with this technology).

2 technologies with TFT Colour Display

• O3 Ozone Generator
• UV-C

3 work programs

• Thorough and extensive sanitising: O3 Ozone Generator + UV-C (without people present)
• Continuous cycle sanitising: UV-C only (e.g. during work, with people present)
• Selective sanitising: ozonisation (O3) only (without people present)

Average time for room Sanitising with O3 Technology 

(rooms with a height of 2.7 – 3.0 m):

• 20 m2 - 3 min.                40 m2 - 6 min.
• 60 m2 - 9 min.               80 m2 - 12 min.
• 100 m2 - 15 min.           120 m2 - 18 min.

Organism

• VIRUS 
• (Poliovirus type-1, Human Rotavirus, Enteric Virus) - Concentration [ppm] 0.2 – 4.1  - Exposure time  < 20 minutes
• BACTERIA
• (E. Coli, Legionella, Mycobacterium, Fecal Streptococcus) - Concentration [ppm] 0.23 – 2.2  - Exposure time  < 20 minutes
• MOULD
• (Aspergillus Niger, various strains of Penicillum, Cladosporium) - Concentration [ppm] 2  - Exposure time  60 minutes
• FUNGI
• (Candida Parapsilosis, Candida Tropicalis) - Concentration [ppm] 0.02 – 0.26  - Exposure time  < 1.67 minutes
• INSECTS
• (Acarus Siro, Tyrophagus Case, Tyrophagus Putrescientiae)- Concentration [ppm] 1.5  – 2 - Exposure time  30 minutes

(Sources: Edelstein et al., 1982; Joret et al., 1982; Farooq and Akhlaque, 1983; Harakeh and Butle, 1986; Kawamuram et al., 1986)

• Technology                  O3 + UV-C (253.7nm)
• Ozone production      10,000 mg/h with ambient air (20°C - 50%RH)
• Air flow/UV-C              70 m3/h
• Ozone timer                 from 1 to 25 minutes
• UV-C timer                   from 30 minutes to continuous

• CYCLE mode             up to 3 x O3+UV combined cycles
• Power supply            230 Vac 50/60 Hz – 100W
• Dimensions                21 x 23 x 41.5 cm
• Weight                        5.9 kg
• Display                       TFT colour